Ref.487 - COMPLETE SECOND HAND PRINTING PLANT STILL IN RUNNING

Ref.487 - COMPLETE SECOND HAND PRINTING PLANT STILL IN RUNNING

N. 1 ARIOLI steam ager in high temperature HT capacity 300 m
- Brand: ARIOLI
- Year: 1999
- Useful working width: 1800 mm
- Feeding by diathermic oil
- High temperature
- Fabric capacity content: about 300 meters
- Entry and exit in plait in opposite position
- Electric control board

N. 1 REGGIANI rotary printing line model UNICA Year 2000
- Brand: REGGIANI
- Model: UNICA
- Year: 2000
- Useful working width 1800 mm
- N. 8 colours
- Dosing pumps
- Automatic washing in the machines of the rollers and of the doctor blades
- Machine for the introduction of the fabric with Non-Stop effect TESTA
- Suctioning on the entry KALIN
- Convex device for the fabric heating suitable also for knit fabric
- Oven with N. 4 chambers gas heated
- Exhauster for the ejection of the exhausted fumes
- Delivery of the fabric in plait
- Electric control board
 
N. 1 REGGIANI rotary printing machine suitable to flock
- Brand: REGGIANI
- Model: RENOIR
- Year: 1988
- Head introduction machine with non-stop effect
- Rotary printing for flocking with 3 magnetic heads
- Cooling by water
- Flocking device AIGLE    
- Single-passage oven with N. 3 chambers for the heat-setting of the flocked fabric
- Heating of the oven by diathermic oil
- Exhausting device for the ejection of the exhausted fumes
- Electric control board

N. 1 Digital printing machine LA MECCANICA year 2013
- Brand: LA MECCANICA
- Model: Leopard
- Year: 2013
- Useful working width 1800 mm
- N. 8 colours
- N. 8 single heads KYOCERA

N. 2 Washing units for the rollers each one for 4 rollers

N. 1 Washing unit for the doctor blades 6 positions

N. 1 Printing table for samples up to 4 meters of fabric with one printing head with rotary roller

Colour kitchen department
N. 1 Colour kitchen CIR year of construction 1985 up-dated in 2005 complete with:
- N. 2 introduction heads
- N. 2 heads for samples
- N. 15 colours
- Tanks for acids and pigments
- N. 1 mixer for the paste capacity 1000 kg
- N. 1 semi-automatic preparation with N. 3 silos for the preparation of the printing pastes with automatic sending to the colour kitchen
N. 1 Cans washing unit
N. 1 Washing unit for small containers IVGM year of construction 2000

N. 1 ARIOLI continuous washing line after printing in open width N. 3 tanks year 2001
- Brand: Arioli
- Year: 2001
- Number of tanks: 3
- Useful working width 1800 mm
- Introduction of the fabric from plait or roll with double motorized widening device and centring
- Device with oscillating arms CORINO
- N. 1 prewashing/soaping tank
- N. 2 washing and rinsing tanks
- N. 1 pre-dryer positioned above the delivery of the line heated by diathermic oil
- Delivery of the fabric in plait
- Electric control board
- This line in addition to the normal washing operations is very suitable also for particular operations such as the “devorè”

N. 1 ARIOLI continuous washing line after printing in open width N. 5 tanks
- Brand: ARIOLI
- Year: 1987
- Number of tanks: 5
- Useful working width: 1800 mm
- Introduction of the fabric from plait or roll with double motorized widening device and centring
- Device with oscillating arms CORINO
- N. 2 pre-washing tanks
- N. 1 tank with relaxing
- N. 2 washing and rinsing tanks
- N. 1 pre-dryer positioned above the delivery of the line heated by diathermic oil
- N. 1 dryer heated by diathermic oil
- Delivery of the fabric in plait
- Electric panel with control pulpit


N. 1 Stenter KRANTZ 5 chambers oil heated working width 1800 mm
- Brand: KRANTZ
- Year: 1985
- Useful working width 1800 mm
- Introduction of the fabric from plait or from roll with suctioning device double motorized widening device and centring device with oscillating arms CORINO
- N. 1 padder BETA 3 cylinders rubber/steel/rubber at equi-pressure
- N. 1 weft straightener MAHLO
- Steaming unit located under the entry arms
- Glueing devices for the selvedges
- N. 5 chambers heated by diathermic oil
- Cooling on the exit
- Trimming and suctioning devices for the selvedges
- Exit of the fabric in plait and big roll
- Exhauster for the ejecting of the exhausted fumes
- Electric control board

N. 1 KUESTER calender
- Brand: KÜSTER
- Year 1987
- N. 2 cylinders: N. 1 in chromed steel and n. 1 in Rakolan
- Heating of the cylinder in chromed steel by diathermic oil coming from the net
- Introduction of the fabric from plait or big roll with axial device for the unwinding of the roll
- Delivery of the fabric with big roll tangential device and big roll device with axial winding
- Electric control board
 
N. 1 second hand packing machine LA MECCANICA
- Brand: LA MECCANICA
- Year: 1998
- Model: Pako3000
- Useful working width 2000
- System for the longitudinal sealing of roll: by means of a welding bar
- System for the closing of the two sides of the roll: by means of clips

N. 1 Hydroextractor diameter 1000 mm
 
N. 1 Open tank with reels ILMA for the washing of very delicate fabrics

N. 1 Brushing unit CLM for flocked fabrics year of construction 2000
 
N. 2 Inspection tables for the fabric LA MECCANICA width 1800 mm

N. 1 Complete laboratory

N. 1 Boiler AEROMECCANICA COLOMBO diathermic oil year of construction 1976 kgcal/h 3.000.000 complete with N. 1 evaporator

N. 1 Boiler AEROMECCANICA COLOMBO year of construction 1984 Kw 2325

N. 1 Rotary compressor brand ALMIG with air storage tank year 2018

N. 1 Rotary compressor brand MATTEI

PLEASE NOTE:
- The above described plant will be running in production until the end of June 2019
- The machines can be sold also separately and individually but we will give the precedence to who is interested in buying the complete plant

Link to all pictures of the plant: https://www.dropbox.com/sh/wnzg7ybnyjb2md6/AABYQDScYYks06gofoyzMwVVa?dl=0